Home and Garden

Type of plaster facade, which should be used with mineral wool, is defined in a specific system solution, with a valid Technical Approval for Structural Engineering Institute. Only systemic solutions, rather than a random selection of ingredients, guarantee good quality and durability of the applied solutions. Warming system of external walls of buildings covered by a light wet a statement ITB No 334/96: insulation of external walls of buildings using light - wet. This method is fastened to the walls of the outer layer of the facade, in which an insulating layer of mineral wool slabs and layer - a thin dressing of plastering and liner fabric-reinforced glass. This system is classified as entirely non-combustible. It also provides a very good sound insulation and vapor permeable outer wall, which affects the healthy and pleasant microclimate in the house. We highlight the thin plaster of cement mineral or polymer (resin). Thin mineral plaster are durable and resistant to water, but more absorbing than plaster polymer. They are characterized by the dozen times the diffusion of water vapor (moisture does not collect and can escape from the facade). Mineral plasters are available for purchase in the form of dry mix packaged in bags. To prepare the mortar, the powder pouring water in the proportions specified by the manufacturer and mixed thoroughly. Thin polymer plasters are available for purchase in the form of ready-to-use product. They should be thoroughly mixed just before use. The polymer mortar binder resins may be acrylic or silicone.